chore: bring the scaffold up to the QRun qbit repository standard

Apache-2.0 LICENSE and NOTICE, community pointer files, CHANGELOG, CLAUDE.md and AGENTS.md, Maven wrapper, Checkstyle, dependabot, CircleCI (qqq-orb 0.6.8, configure-package-install pre-step, GA-only publish_release), the release-rc caller workflow, and a minimal EmailQBitProducer and EmailQBitConfig on qbit-build-parent 2.0.0 with the QQQ 4.1 BOM. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 19:17:38 -05:00
35 changed files with 1541 additions and 360 deletions
@@ -1,14 +1,65 @@
 version: 2.1
-setup: true
+
 orbs:
-  qqq-orb: kingsrook/qqq-orb@0.8
+  qqq-orb: kingsrook/qqq-orb@0.6.8
+
+commands:
+  configure-package-install:
+    steps:
+      - run:
+          name: Keep package installation unattended
+          command: |
+            # These build machines are discarded after the job.
+            sudo install -d /etc/needrestart/conf.d
+            printf '%s\n' '$nrconf{restart} = "l";' | sudo tee /etc/needrestart/conf.d/99-qqq-ci.conf >/dev/null
+
 workflows:
-  setup:
+
+  test_only:
    jobs:
-    - qqq-orb/generate_pipeline:
-        orb_version: '0.8'
-        filters:
-          branches:
-            ignore: automation/qbit-rc-pending
-          tags:
-            ignore: /.*/
+      - qqq-orb/mvn_test_only:
+          pre-steps:
+            - configure-package-install
+          context: [ qqq-maven-registry-credentials ]
+          filters:
+            branches:
+              ignore: /(develop|release/.*|integration.*)/
+            tags:
+              only: []  
+
+  publish_snapshot:
+    jobs:
+      - qqq-orb/mvn_publish:
+          pre-steps:
+            - configure-package-install
+          context: [ qqq-maven-registry-credentials ]
+          branch_type: snapshot
+          filters:
+            branches:
+              only:
+                - develop
+
+  publish_release_candidate:
+    jobs:
+      - qqq-orb/mvn_publish:
+          pre-steps:
+            - configure-package-install
+          context: [ qqq-maven-registry-credentials ]
+          branch_type: release_candidate
+          filters:
+            branches:
+              only:
+                - /release\/.*/
+
+  publish_release:
+    jobs:
+      - qqq-orb/mvn_publish:
+          pre-steps:
+            - configure-package-install
+          context: [ qqq-maven-registry-credentials ]
+          branch_type: release
+          filters:
+            branches:
+              ignore: /.*/
+            tags:
+              only: [ /^v\d+\.\d+\.\d+$/ ]
@@ -0,0 +1,20 @@
+# QRun-IO qbit .editorconfig: the Kingsrook layout (3-space indentation, never tabs).
+root = true
+
+[*]
+charset = utf-8
+end_of_line = lf
+insert_final_newline = true
+trim_trailing_whitespace = true
+indent_style = space
+indent_size = 3
+tab_width = 3
+
+[*.md]
+trim_trailing_whitespace = false
+
+[*.{yml,yaml}]
+indent_size = 2
+
+[*.{cmd,bat}]
+end_of_line = crlf
@@ -0,0 +1,3 @@
+* text=auto eol=lf
+*.cmd text eol=crlf
+mvnw text eol=lf
@@ -1,25 +0,0 @@
-# Standard QRun release caller (v2, thin contract): every push and manual dispatch delegates to the protected qrun-release-v1 channel. Do not edit per repository.
-name: qrun-release
-on:
-  push: {}
-  workflow_dispatch: {}
-permissions:
-  contents: read
-  actions: read
-jobs:
-  release:
-    uses: self:KofTwentyTwo/platform-ci/.gitea/workflows/java-docker.yaml@qrun-release-v1
-    with:
-      runner: linux-small
-      docker-runner: container-build
-      browsers: true
-      browser-runner: browser-build
-  postpublish:
-    if: ${{ needs.release.outputs.capture == 'true' }}
-    needs: release
-    permissions:
-      contents: write
-      actions: write
-    uses: self:KofTwentyTwo/platform-ci/.gitea/workflows/qrun-source-version.yaml@qrun-release-v1
-    with:
-      runner: linux-small
@@ -0,0 +1,25 @@
+# Weekly, grouped dependency updates. Minor and patch updates arrive as one PR per ecosystem;
+# major updates stay separate so each gets its own review. At most three version-update PRs per
+# ecosystem are open at once. Security updates are enabled in the repository settings and are
+# not limited by this schedule.
+version: 2
+updates:
+  - package-ecosystem: maven
+    directory: /
+    target-branch: develop
+    schedule:
+      interval: weekly
+    open-pull-requests-limit: 3
+    groups:
+      maven-minor-and-patch:
+        update-types: [minor, patch]
+
+  - package-ecosystem: github-actions
+    directory: /
+    target-branch: develop
+    schedule:
+      interval: weekly
+    open-pull-requests-limit: 3
+    groups:
+      github-actions:
+        patterns: ['*']
@@ -0,0 +1,31 @@
+# GitHub Release Configuration
+# Auto-generates release notes from PR labels
+
+changelog:
+  exclude:
+    labels:
+      - ignore-for-release
+      - duplicate
+      - invalid
+    authors:
+      - dependabot
+      - dependabot[bot]
+  categories:
+    - title: Breaking Changes
+      labels:
+        - breaking-change
+        - breaking
+    - title: New Features
+      labels:
+        - enhancement
+        - feature
+    - title: Bug Fixes
+      labels:
+        - bug
+        - fix
+    - title: Dependencies
+      labels:
+        - dependencies
+    - title: Other Changes
+      labels:
+        - "*"
@@ -1,23 +0,0 @@
-name: CodeQL
-'on':
-  push:
-    branches:
-    - main
-    - develop
-    - release/**
-    - hotfix/**
-  pull_request: {}
-  schedule:
-  - cron: 41 16 * * 0
-  workflow_dispatch: {}
-permissions:
-  contents: read
-  actions: read
-  security-events: write
-  packages: read
-concurrency:
-  group: codeql-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: ${{ github.event_name == 'pull_request' }}
-jobs:
-  analyze:
-    uses: QRun-IO/qqq-orb/.github/workflows/qbit-codeql.yml@c288a8864fe9054f68410e1d78f5863aea4c4d22
@@ -0,0 +1,25 @@
+# Cut the next release candidate (QRun-IO/qqq docs/QRUN-QBIT-REPO-STANDARD.md, C6):
+# run this workflow by hand, or merge a develop PR labelled `release:rc`. It merges develop into
+# the release line and the release/* push runs CircleCI publish_release_candidate.
+name: Release candidate
+
+on:
+  workflow_dispatch:
+    inputs:
+      dry_run:
+        description: Print the plan without merging or creating branches
+        type: boolean
+        default: false
+  pull_request:
+    types: [closed]
+    branches: [develop]
+
+permissions:
+  contents: write
+
+jobs:
+  release-rc:
+    if: github.event_name == 'workflow_dispatch' || (github.event.pull_request.merged == true && contains(github.event.pull_request.labels.*.name, 'release:rc'))
+    uses: QRun-IO/.github/.github/workflows/qbit-release-rc.yml@main
+    with:
+      dry_run: ${{ github.event_name == 'workflow_dispatch' && inputs.dry_run }}
@@ -1,20 +1,21 @@
-# Maven
 target/
+.env
+.idea
+*.iml
+*.class
+*.log
 *.jar
 *.war
+*.nar
 *.ear
-
-# IDE
-.idea/
-*.iml
-.vscode/
-.project
-.classpath
-.settings/
-
-# OS
+*.zip
+*.tar.gz
+*.rar
+hs_err_pid*
 .DS_Store
-Thumbs.db
-
-# Logs
-*.log
+*.sw*
+.flattened-pom.xml
+dependency-reduced-pom.xml
+/.env.local
+/.cache/
+.claude/settings.local.json
@@ -0,0 +1,3 @@
+wrapperVersion=3.3.4
+distributionType=only-script
+distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.9.11/apache-maven-3.9.11-bin.zip
@@ -1,15 +0,0 @@
-profile: qbit
-orb_version: '0.8'
-default_branch: develop
-java_version: '21'
-browsers: true
-api_checks: false
-docs_only: false
-release_on_main: false
-release_tag_policy: none
-test_branch_policy: all
-publish:
-  snapshot: false
-  release_candidate: false
-  release: false
-  asciidoc: false
@@ -0,0 +1,47 @@
+# AGENTS.md
+
+This file provides guidance to coding agents working in this repository (same content as CLAUDE.md).
+
+## Project Overview
+
+**QBit Email**: one email service for a QQQ system (outbox, providers, templates with branding,
+delivery tracking, suppression, unsubscribe, PHI-safe sending; inbound in phase 2).
+Design: `docs/DESIGN.md`.
+
+## Build Commands
+
+```bash
+./mvnw compile          # always use the wrapper: Maven 3.10 cannot read the parent POM
+./mvnw test
+./mvnw verify           # tests + Checkstyle + JaCoCo gate (70% instructions, 90% classes)
+```
+
+## Architecture
+
+- **Entry point:** `EmailQBitProducer implements QBitMetaDataProducer<EmailQBitConfig>`, package `com.kingsrook.qbits.email`.
+- Packages are added per phase as `docs/DESIGN.md` describes.
+
+## Invariants
+
+- Every send goes through the outbox (`email_message`); nothing sends inline.
+- Provider credentials are environment-variable NAMES; values are never stored, logged or returned.
+- PHI and PII never reach a body or a variable snapshot unless the template is `phiApproved`; snapshots follow the secured-data redaction and HMAC rules.
+
+## Naming (owner rule)
+
+- Tables are lowercase snake_case, prefixed `email_`; the backend name is the table name; columns are snake_case.
+- Permissions use the full qbit name: `email.view`, `email.send`, `email.manage`, `email.admin`.
+- Data lives in standard visible tables. Processes are table or record actions, never in the nav. The nav lists only the main tables.
+- UI endpoints are `/qqq/v1` spec extensions (`docs/UI-API-EXTENSIONS.md` in QRun-IO/qqq); provider webhooks are under `/qqq/hooks/email/...`.
+
+## Code Style
+
+3-space indent, braces on the next line, `return (x);`, flower-box Javadoc on every class and method, fluent `withX()` setters.
+
+## Release
+
+- CircleCI qqq-orb 0.6.8.
+- `develop` publishes SNAPSHOTs.
+- `release/*` publishes RCs (automated by `.github/workflows/release-rc.yml`).
+- `vX.Y.Z` tags publish releases (GA tags only).
+- Never push `hotfix/*` or `release/*` branches by hand; use `feature/` or `fix/`.
@@ -0,0 +1,9 @@
+# Changelog
+
+All notable changes to QBit Email are documented in this file.
+The format follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/) and the project uses [Semantic Versioning](https://semver.org/).
+
+## [Unreleased]
+
+### Added
+- Repository scaffold to the QRun qbit repository standard (Apache-2.0, CircleCI qqq-orb 0.6.8 with the `configure-package-install` pre-step, GA-only `publish_release`, the `release-rc` caller workflow).
@@ -1,17 +1,47 @@
-# qbit-template-extension
+# CLAUDE.md

-GitHub template repository for scaffolding QQQ "Extension QBits" (infrastructure-level plugins: table customizers, auth, audit, action wrappers). Not a shipping library — consumers click "Use this template" and rename the `com.kingsrook.qbits.example` package.
+This file provides guidance to Claude Code when working with code in this repository.

-## QQQ 4.0 baseline — 2026-09-24
+## Project Overview

-The historical review below predates the 4.0 migration. This template targets Java 21 and the public QQQ 4.0.0 release from Maven Central. The corrected APIs, license references and actual template commands are in README.md and docs/00-getting-started.md. Preserve the documented multi-instance and scaffold limitations.
+**QBit Email**: one email service for a QQQ system (outbox, providers, templates with branding,
+delivery tracking, suppression, unsubscribe, PHI-safe sending; inbound in phase 2).
+Design: `docs/DESIGN.md`.

-## Knowledge base
+## Build Commands

-Reviewed dossiers for this repo and the wider QQQ platform live in the second-brain vault:
+```bash
+./mvnw compile          # always use the wrapper: Maven 3.10 cannot read the parent POM
+./mvnw test
+./mvnw verify           # tests + Checkstyle + JaCoCo gate (70% instructions, 90% classes)
+```

- Hub / entry point: `R:/Git.Local/KofTwentyTwo/second-brain/knowledge/qqq/qqq-hub.md`
- This repo's dossier: `R:/Git.Local/KofTwentyTwo/second-brain/knowledge/qqq/repos/qbit-template-extension.md`
- QBit mechanics refresher: `R:/Git.Local/KofTwentyTwo/second-brain/knowledge/qqq/architecture/metadata-model.md`
+## Architecture

-Reviewed at commit `e7d4b4d672cc` (branch `main`, 2026-05-21). Known drift as of that review: no `qbit-build-parent` parent pom (org convention), qqq pinned at 0.35.0 on main (0.40.0-SNAPSHOT on develop), README still claims AGPL-3.0 while LICENSE/NOTICE are Apache-2.0, and README references `scripts/customize_template.py` / `actions/ExampleActionCustomizer.java` which do not exist. See the dossier's "Maturity & risks" and "v4.0 impact" sections before modifying the scaffold.
+- **Entry point:** `EmailQBitProducer implements QBitMetaDataProducer<EmailQBitConfig>`, package `com.kingsrook.qbits.email`.
+- Packages are added per phase as `docs/DESIGN.md` describes.
+
+## Invariants
+
+- Every send goes through the outbox (`email_message`); nothing sends inline.
+- Provider credentials are environment-variable NAMES; values are never stored, logged or returned.
+- PHI and PII never reach a body or a variable snapshot unless the template is `phiApproved`; snapshots follow the secured-data redaction and HMAC rules.
+
+## Naming (owner rule)
+
+- Tables are lowercase snake_case, prefixed `email_`; the backend name is the table name; columns are snake_case.
+- Permissions use the full qbit name: `email.view`, `email.send`, `email.manage`, `email.admin`.
+- Data lives in standard visible tables. Processes are table or record actions, never in the nav. The nav lists only the main tables.
+- UI endpoints are `/qqq/v1` spec extensions (`docs/UI-API-EXTENSIONS.md` in QRun-IO/qqq); provider webhooks are under `/qqq/hooks/email/...`.
+
+## Code Style
+
+3-space indent, braces on the next line, `return (x);`, flower-box Javadoc on every class and method, fluent `withX()` setters.
+
+## Release
+
+- CircleCI qqq-orb 0.6.8.
+- `develop` publishes SNAPSHOTs.
+- `release/*` publishes RCs (automated by `.github/workflows/release-rc.yml`).
+- `vX.Y.Z` tags publish releases (GA tags only).
+- Never push `hotfix/*` or `release/*` branches by hand; use `feature/` or `fix/`.
@@ -0,0 +1,3 @@
+# Code of Conduct
+
+See Project level [Code of Conduct](https://github.com/QRun-IO/qqq/blob/develop/CODE_OF_CONDUCT.md)
@@ -0,0 +1,3 @@
+# Code Style Guide
+
+* See Project [Code Style Guide](https://github.com/QRun-IO/qqq/blob/develop/CODE_STYLE.md)
@@ -0,0 +1,6 @@
+# Contributing to QBit Webhooks
+
+* See Project [Contributing](https://github.com/QRun-IO/qqq/blob/develop/CONTRIBUTING.md)
+* Branches follow GitFlow: `feature/*` from `develop`, pull requests to `develop`, `release/*` for release candidates, `vX.Y.Z` tags for releases.
+* Commits are signed and follow Conventional Commits.
+* Build and test locally with `./mvnw verify` (Java 21).
@@ -176,7 +176,7 @@

   END OF TERMS AND CONDITIONS

-   Copyright 2022-2025 QRunIO, LLC
+   Copyright 2024 Kingsrook, LLC

   Licensed under the Apache License, Version 2.0 (the "License");
   you may not use this file except in compliance with the License.
@@ -1,6 +1,6 @@
-qBit Template - Extension
-Copyright 2022-2025 QRunIO, LLC
+QBit Email
+Copyright 2026 Kingsrook, LLC

-This product includes software developed at QRunIO, LLC (https://qrun.io/).
+This product includes software developed at Kingsrook, LLC (https://kingsrook.com/).

 Licensed under the Apache License, Version 2.0.
@@ -1,42 +1,52 @@
-# QBit Template: Extension
+# QBit Email

-Template repository for creating QQQ Extension QBits - infrastructure extensions, customizers, and action handlers.
+One email service for a QQQ system: an outbox with async sending, retries, dead letters and
+idempotency keys; providers as data rows (SMTP relay, Amazon SES, Postmark, SendGrid, Mailgun,
+Gmail); Markdown and MJML/HTML templates with versions and branding; delivery tracking from
+provider webhooks; a suppression list; RFC 8058 one-click unsubscribe; and PHI-safe sending.
+Inbound mail is phase 2.

-## What is an Extension QBit?
+Design: [`docs/DESIGN.md`](docs/DESIGN.md).

-Extension QBits extend or enhance how QQQ operates at the infrastructure/framework level. They provide:
- New backend implementations
- Authentication mechanisms
- Audit capabilities
- Table customizers
- Action handlers
+## Requirements

-## Quick Start
+- Java 21
+- QQQ 4.1 (`qqq-bom-pom` 4.1.0-RC.4 or later)
+- An RDBMS backend for the `email_` tables

-Requires **Java 21**, **Maven 3.8+**, and QQQ **4.0.0**. Create your repository, customize its Maven coordinates and Java package/classes, implement the table customizer, then run `mvn clean verify`. See [Getting Started](docs/00-getting-started.md).
+## Install

-## Structure
-
-```
-src/main/java/com/kingsrook/qbits/example/
-├── ExampleExtensionQBitConfig.java    # Configuration
-├── ExampleExtensionQBitProducer.java  # Entry point
-└── customizers/
-    └── ExampleTableCustomizer.java    # Table customization
+```xml
+<dependency>
+   <groupId>com.kingsrook.qbits</groupId>
+   <artifactId>qbit-email</artifactId>
+   <version>${qbit-email.version}</version>
+</dependency>
 ```

-## Key Characteristics
+```java
+new EmailQBitProducer()
+   .withQBitConfig(new EmailQBitConfig().withBackendName("rdbms"))
+   .produce(qInstance);
+```

- **No QAppSection** - Pure infrastructure
- **No user-facing tables** (or minimal operational)
- **Wraps existing tables/processes** with new behavior
- **Validates dependencies** on other QQQ components
+## Tables, permissions and configuration

-## Documentation
+See [`docs/DESIGN.md`](docs/DESIGN.md). Tables are prefixed `email_`; permissions use the full
+qbit name (`email.view`, `email.send`, `email.manage`, `email.admin`).

- [Getting Started](docs/00-getting-started.md)
- [Extension Patterns](docs/01-extension-patterns.md)
+## Adopting in another app
+
+Add the dependency, produce the qbit against your RDBMS backend, add a provider row, and send
+through `EmailService` (or the `email_send_templated` process). Code that already calls core's
+`SendEmailAction` can route through the outbox with the messaging bridge (DESIGN section 2).
+
+## Build
+
+```bash
+./mvnw verify    # tests, Checkstyle and the JaCoCo gate
+```

 ## License

-See [LICENSE](LICENSE) and [NOTICE](NOTICE).
+Apache License 2.0. See [LICENSE](LICENSE) and [NOTICE](NOTICE).
@@ -0,0 +1,4 @@
+# Security Policy
+
+* See Project [Security Policy](https://github.com/QRun-IO/qqq/blob/develop/SECURITY.md)
+* Report suspected vulnerabilities privately through GitHub private vulnerability reporting on this repository, never in a public issue.
@@ -0,0 +1,246 @@
+<?xml version="1.0"?>
+<!--
+  ~ QQQ - Low-code Application Framework for Engineers.
+  ~ Copyright (C) 2021-2022.  Kingsrook, LLC
+  ~ 651 N Broad St Ste 205 # 6917 | Middletown DE 19709 | United States
+  ~ contact@kingsrook.com
+  ~ https://github.com/Kingsrook/
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~     https://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<!DOCTYPE module PUBLIC
+        "-//Puppy Crawl//DTD Check Configuration 1.3//EN"
+        "http://checkstyle.sourceforge.net/dtds/configuration_1_3.dtd">
+<!--
+   See reference at https://checkstyle.sourceforge.io/checks.html
+-->
+<module name = "Checker">
+   <property name="charset" value="UTF-8"/>
+
+   <property name="severity" value="warning"/>
+
+   <property name="fileExtensions" value="java, properties, xml"/>
+   <!-- Checks for whitespace                        -->
+   <!-- See http://checkstyle.sf.net/config_whitespace.html -->
+   <module name="FileTabCharacter">
+      <property name="eachLine" value="true"/>
+   </module>
+
+   <!--
+   <module name="LineLength">
+      <property name="max" value="100"/>
+      <property name="ignorePattern" value="^package.*|^import.*|a href|href|http://|https://|ftp://"/>
+   </module>
+   -->
+
+   <module name="TreeWalker">
+      <module name="SuppressWarningsHolder"/>
+      <module name="OuterTypeFilename"/>
+      <module name="IllegalTokenText">
+         <property name="tokens" value="STRING_LITERAL, CHAR_LITERAL"/>
+         <property name="format" value="\\u00(09|0(a|A)|0(c|C)|0(d|D)|22|27|5(C|c))|\\(0(10|11|12|14|15|42|47)|134)"/>
+         <property name="message" value="Consider using special escape sequence instead of octal value or Unicode escaped value."/>
+      </module>
+      <module name="AvoidEscapedUnicodeCharacters">
+         <property name="allowEscapesForControlCharacters" value="true"/>
+         <property name="allowByTailComment" value="true"/>
+         <property name="allowNonPrintableEscapes" value="true"/>
+      </module>
+      <module name="AvoidStarImport"/>
+      <module name="OneTopLevelClass"/>
+      <module name="NoLineWrap"/>
+      <module name="EmptyBlock">
+         <property name="option" value="TEXT"/>
+         <property name="tokens" value="LITERAL_TRY, LITERAL_FINALLY, LITERAL_IF, LITERAL_ELSE, LITERAL_SWITCH"/>
+      </module>
+      <module name="NeedBraces"/>
+      <module name="LeftCurly">
+         <property name="option" value="nl"/>
+      </module>
+      <module name="RightCurly">
+         <property name="option" value="alone"/>
+      </module>
+      <!--
+      <module name="WhitespaceAround">
+         <property name="allowEmptyConstructors" value="true"/>
+         <property name="allowEmptyMethods" value="true"/>
+         <property name="allowEmptyTypes" value="true"/>
+         <property name="allowEmptyLoops" value="true"/>
+         <message key="ws.notFollowed"
+          value="WhitespaceAround: ''{0}'' is not followed by whitespace. Empty blocks may only be represented as '{}' when not part of a multi-block statement (4.1.3)"/>
+          <message key="ws.notPreceded"
+          value="WhitespaceAround: ''{0}'' is not preceded with whitespace."/>
+      </module>
+      -->
+      <module name="OneStatementPerLine"/>
+      <module name="MultipleVariableDeclarations"/>
+      <module name="ArrayTypeStyle"/>
+      <module name="MissingSwitchDefault"/>
+      <module name="FallThrough"/>
+      <module name="UpperEll"/>
+      <module name="ModifierOrder"/>
+      <module name="EmptyLineSeparator">
+         <property name="allowNoEmptyLineBetweenFields" value="true"/>
+      </module>
+      <module name="SeparatorWrap">
+         <property name="id" value="SeparatorWrapDot"/>
+         <property name="tokens" value="DOT"/>
+         <property name="option" value="nl"/>
+      </module>
+      <module name="SeparatorWrap">
+         <property name="id" value="SeparatorWrapComma"/>
+         <property name="tokens" value="COMMA"/>
+         <property name="option" value="EOL"/>
+      </module>
+      <module name="SeparatorWrap">
+         <!-- ELLIPSIS is EOL until https://github.com/google/styleguide/issues/258 -->
+         <property name="id" value="SeparatorWrapEllipsis"/>
+         <property name="tokens" value="ELLIPSIS"/>
+         <property name="option" value="EOL"/>
+      </module>
+      <module name="SeparatorWrap">
+         <!-- ARRAY_DECLARATOR is EOL until https://github.com/google/styleguide/issues/259 -->
+         <property name="id" value="SeparatorWrapArrayDeclarator"/>
+         <property name="tokens" value="ARRAY_DECLARATOR"/>
+         <property name="option" value="EOL"/>
+      </module>
+      <module name="SeparatorWrap">
+         <property name="id" value="SeparatorWrapMethodRef"/>
+         <property name="tokens" value="METHOD_REF"/>
+         <property name="option" value="nl"/>
+      </module>
+      <module name="PackageName">
+         <property name="format" value="^[a-z]+(\.[a-z][a-z0-9]*)*$"/>
+         <message key="name.invalidPattern"
+          value="Package name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="TypeName">
+         <message key="name.invalidPattern"
+          value="Type name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="MemberName">
+         <property name="format" value="^[_a-zA-Z]([a-z0-9A-Z][a-zA-Z0-9]*)?$"/>
+         <message key="name.invalidPattern" value="Member name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="ParameterName">
+         <property name="format" value="^[a-zA-Z]([a-z0-9A-Z][a-zA-Z0-9]*)?$"/>
+         <message key="name.invalidPattern" value="Parameter name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="CatchParameterName">
+         <property name="format" value="^[a-zA-Z]([a-z0-9A-Z][a-zA-Z0-9]*)?$"/>
+         <message key="name.invalidPattern" value="Catch parameter name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="LocalVariableName">
+         <property name="tokens" value="VARIABLE_DEF"/>
+         <property name="format" value="^[a-zA-Z]([a-z0-9A-Z][a-zA-Z0-9]*)?$"/>
+         <message key="name.invalidPattern" value="Local variable name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="ClassTypeParameterName">
+         <property name="format" value="(^[A-Z][0-9]?)$|([A-Z][_A-Z0-9]*$)"/>
+         <message key="name.invalidPattern" value="Class type name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="MethodTypeParameterName">
+         <property name="format" value="(^[A-Z][0-9]?)$|([A-Z][_A-Z0-9]*$)"/>
+         <message key="name.invalidPattern" value="Method type name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="InterfaceTypeParameterName">
+         <property name="format" value="(^[A-Z][0-9]?)$|([A-Z][_A-Z0-9]*$)"/>
+         <message key="name.invalidPattern" value="Interface type name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="NoFinalizer"/>
+      <module name="GenericWhitespace">
+         <message key="ws.followed" value="GenericWhitespace ''{0}'' is followed by whitespace."/>
+         <message key="ws.preceded" value="GenericWhitespace ''{0}'' is preceded with whitespace."/>
+         <message key="ws.illegalFollow" value="GenericWhitespace ''{0}'' should followed by whitespace."/>
+         <message key="ws.notPreceded" value="GenericWhitespace ''{0}'' is not preceded with whitespace."/>
+      </module>
+      <module name="Indentation">
+         <property name="basicOffset" value="3"/>
+         <property name="braceAdjustment" value="0"/>
+         <property name="caseIndent" value="3"/>
+         <property name="throwsIndent" value="6"/>
+         <property name="lineWrappingIndentation" value="3"/>
+         <property name="arrayInitIndent" value="6"/>
+      </module>
+      <!--
+      <module name="AbbreviationAsWordInName">
+         <property name="ignoreFinal" value="false"/>
+         <property name="allowedAbbreviationLength" value="1"/>
+      </module>
+      <module name="OverloadMethodsDeclarationOrder"/>
+      <module name="VariableDeclarationUsageDistance"/>
+      <module name="CustomImportOrder">
+         <property name="sortImportsInGroupAlphabetically" value="true"/>
+         <property name="separateLineBetweenGroups" value="true"/>
+         <property name="customImportOrderRules" value="STATIC###THIRD_PARTY_PACKAGE"/>
+      </module>
+      -->
+      <module name="CustomImportOrder">
+         <property name="customImportOrderRules" value="SPECIAL_IMPORTS###STANDARD_JAVA_PACKAGE###THIRD_PARTY_PACKAGE###STATIC"/>
+         <property name="specialImportsRegExp" value="^javax\."/>
+         <property name="standardPackageRegExp" value="^java\."/>
+         <property name="sortImportsInGroupAlphabetically" value="true"/>
+         <property name="separateLineBetweenGroups" value="false"/>
+      </module>
+      <module name="MethodParamPad"/>
+      <module name="NoWhitespaceBefore">
+         <property name="tokens" value="COMMA, SEMI, POST_INC, POST_DEC, DOT, ELLIPSIS, METHOD_REF"/>
+         <property name="allowLineBreaks" value="true"/>
+      </module>
+      <module name="ParenPad"/>
+      <module name="OperatorWrap">
+         <property name="option" value="NL"/>
+         <property name="tokens" value="BAND, BOR, BSR, BXOR, DIV, EQUAL, GE, GT, LAND, LE, LITERAL_INSTANCEOF, LOR, LT, MINUS, MOD, NOT_EQUAL, PLUS, QUESTION, SL, SR, STAR, METHOD_REF "/>
+      </module>
+      <module name="AnnotationLocation">
+         <property name="id" value="AnnotationLocationMostCases"/>
+         <property name="tokens" value="CLASS_DEF, INTERFACE_DEF, ENUM_DEF, METHOD_DEF, CTOR_DEF"/>
+      </module>
+      <module name="AnnotationLocation">
+         <property name="id" value="AnnotationLocationVariables"/>
+         <property name="tokens" value="VARIABLE_DEF"/>
+         <property name="allowSamelineMultipleAnnotations" value="true"/>
+      </module>
+      <module name="JavadocMethod">
+         <property name="allowMissingParamTags" value="true"/>
+         <property name="allowMissingReturnTag" value="true"/>
+         <property name="allowedAnnotations" value="Override, Test"/>
+      </module>
+      <module name="MissingJavadocMethod">
+         <property name="scope" value="private"/>
+      </module>
+      <module name="MissingJavadocType">
+         <property name="scope" value="private"/>
+      </module>
+      <module name="MethodName">
+         <property name="format" value="^[a-z][a-zA-Z0-9_]*$"/>
+         <message key="name.invalidPattern"
+          value="Method name ''{0}'' must match pattern ''{1}''."/>
+      </module>
+      <module name="EmptyCatchBlock">
+         <property name="exceptionVariableName" value="expected"/>
+      </module>
+      <module name="CommentsIndentation"/>
+
+      <!-- this would be nice, but requires the the @inheritDoc javadoc tag... -->
+      <module name="MissingOverride"/>
+
+   </module>
+   <module name="Header">
+     <property name="headerFile" value="checkstyle/license.txt"/>
+     <property name="fileExtensions" value="java"/>
+     <property name="ignoreLines" value="3"/>
+   </module>
+   <module name="SuppressWarningsFilter"/>
+</module>
@@ -0,0 +1,19 @@
+/*
+ * QQQ - Low-code Application Framework for Engineers.
+ * Copyright (C) 2021-2025.  Kingsrook, LLC
+ * 651 N Broad St Ste 205 # 6917 | Middletown DE 19709 | United States
+ * contact@kingsrook.com
+ * https://github.com/Kingsrook/
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
@@ -1,28 +0,0 @@
-# Getting Started
-
-Targets Java 21, Maven 3.8 or later, and QQQ 4.0.0. Maven resolves the framework dependencies from Maven Central.
-
-1. Choose **Use this template** on GitHub, then clone the repository you created.
-2. In `pom.xml`, set your own `groupId`, `artifactId`, name, description, and version.
-3. Use your IDE's package refactoring to rename `com.kingsrook.qbits.example` throughout `src/`. Rename the `Example*` classes and update their imports and references with the IDE's rename refactoring.
-4. Update the QBit producer's `GROUP_ID`, `ARTIFACT_ID`, and `VERSION` constants to match your project. Give the metadata names their own stable names before combining the QBit with other examples.
-5. Build the generated project:
-
-```bash
-mvn clean verify
-```
-
-The repository provides example Java sources; customization uses normal package/class refactoring. Keep example coordinates unpublished. After customizing, add tests for your QBit's behavior before setting up its publishing workflow.
-
-## Register with a host application
-
-The following uses the original example names; substitute the names chosen above:
-
-```java
-new ExampleExtensionQBitProducer()
-   .withConfig(new ExampleExtensionQBitConfig()
-      .withTargetTableName("order"))
-   .produce(qInstance, "my-extension");
-```
-
-Register the target table before producing the extension, then implement its customizer. See [Extension Patterns](01-extension-patterns.md).
@@ -1,16 +0,0 @@
-# Extension Patterns
-
-[ExampleExtensionQBitProducer](../src/main/java/com/kingsrook/qbits/example/ExampleExtensionQBitProducer.java) registers the QBit identity and calls `applyTableCustomizations` for the configured target. That method is the extension point: look up the table, validate that it exists, and call your customized [ExampleTableCustomizer](../src/main/java/com/kingsrook/qbits/example/customizers/ExampleTableCustomizer.java).
-
-```java
-QTableMetaData table = qInstance.getTable(tableName);
-if(table == null)
-{
-   throw new QException("Target table not found: " + tableName);
-}
-new ExampleTableCustomizer().customize(table);
-```
-
-When implementing this method, add `throws QException` to its declaration. Run the config's `validate(QInstance, List<String>)` before registering metadata, and report validation errors rather than silently ignoring a missing target. The uncustomized template contains placeholders for this behavior.
-
-For record hooks, use QQQ's existing table customizer interfaces or `AbstractPreInsertCustomizer`. Its `apply(List<QRecord>)` method returns the records for the next stage; register the customizer through the table's `TableCustomizers.PRE_INSERT_RECORD` role. Check the actual QQQ interface before adding another hook. Add tests proving that the intended table changes and invalid configurations are handled.
@@ -0,0 +1,3 @@
+# QBit Email design
+
+The design spec arrives in the spec PR (`feature/design-spec`).
@@ -0,0 +1,295 @@
+#!/bin/sh
+# ----------------------------------------------------------------------------
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# ----------------------------------------------------------------------------
+
+# ----------------------------------------------------------------------------
+# Apache Maven Wrapper startup batch script, version 3.3.4
+#
+# Optional ENV vars
+# -----------------
+#   JAVA_HOME - location of a JDK home dir, required when download maven via java source
+#   MVNW_REPOURL - repo url base for downloading maven distribution
+#   MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven
+#   MVNW_VERBOSE - true: enable verbose log; debug: trace the mvnw script; others: silence the output
+# ----------------------------------------------------------------------------
+
+set -euf
+[ "${MVNW_VERBOSE-}" != debug ] || set -x
+
+# OS specific support.
+native_path() { printf %s\\n "$1"; }
+case "$(uname)" in
+CYGWIN* | MINGW*)
+  [ -z "${JAVA_HOME-}" ] || JAVA_HOME="$(cygpath --unix "$JAVA_HOME")"
+  native_path() { cygpath --path --windows "$1"; }
+  ;;
+esac
+
+# set JAVACMD and JAVACCMD
+set_java_home() {
+  # For Cygwin and MinGW, ensure paths are in Unix format before anything is touched
+  if [ -n "${JAVA_HOME-}" ]; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ]; then
+      # IBM's JDK on AIX uses strange locations for the executables
+      JAVACMD="$JAVA_HOME/jre/sh/java"
+      JAVACCMD="$JAVA_HOME/jre/sh/javac"
+    else
+      JAVACMD="$JAVA_HOME/bin/java"
+      JAVACCMD="$JAVA_HOME/bin/javac"
+
+      if [ ! -x "$JAVACMD" ] || [ ! -x "$JAVACCMD" ]; then
+        echo "The JAVA_HOME environment variable is not defined correctly, so mvnw cannot run." >&2
+        echo "JAVA_HOME is set to \"$JAVA_HOME\", but \"\$JAVA_HOME/bin/java\" or \"\$JAVA_HOME/bin/javac\" does not exist." >&2
+        return 1
+      fi
+    fi
+  else
+    JAVACMD="$(
+      'set' +e
+      'unset' -f command 2>/dev/null
+      'command' -v java
+    )" || :
+    JAVACCMD="$(
+      'set' +e
+      'unset' -f command 2>/dev/null
+      'command' -v javac
+    )" || :
+
+    if [ ! -x "${JAVACMD-}" ] || [ ! -x "${JAVACCMD-}" ]; then
+      echo "The java/javac command does not exist in PATH nor is JAVA_HOME set, so mvnw cannot run." >&2
+      return 1
+    fi
+  fi
+}
+
+# hash string like Java String::hashCode
+hash_string() {
+  str="${1:-}" h=0
+  while [ -n "$str" ]; do
+    char="${str%"${str#?}"}"
+    h=$(((h * 31 + $(LC_CTYPE=C printf %d "'$char")) % 4294967296))
+    str="${str#?}"
+  done
+  printf %x\\n $h
+}
+
+verbose() { :; }
+[ "${MVNW_VERBOSE-}" != true ] || verbose() { printf %s\\n "${1-}"; }
+
+die() {
+  printf %s\\n "$1" >&2
+  exit 1
+}
+
+trim() {
+  # MWRAPPER-139:
+  #   Trims trailing and leading whitespace, carriage returns, tabs, and linefeeds.
+  #   Needed for removing poorly interpreted newline sequences when running in more
+  #   exotic environments such as mingw bash on Windows.
+  printf "%s" "${1}" | tr -d '[:space:]'
+}
+
+scriptDir="$(dirname "$0")"
+scriptName="$(basename "$0")"
+
+# parse distributionUrl and optional distributionSha256Sum, requires .mvn/wrapper/maven-wrapper.properties
+while IFS="=" read -r key value; do
+  case "${key-}" in
+  distributionUrl) distributionUrl=$(trim "${value-}") ;;
+  distributionSha256Sum) distributionSha256Sum=$(trim "${value-}") ;;
+  esac
+done <"$scriptDir/.mvn/wrapper/maven-wrapper.properties"
+[ -n "${distributionUrl-}" ] || die "cannot read distributionUrl property in $scriptDir/.mvn/wrapper/maven-wrapper.properties"
+
+case "${distributionUrl##*/}" in
+maven-mvnd-*bin.*)
+  MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/
+  case "${PROCESSOR_ARCHITECTURE-}${PROCESSOR_ARCHITEW6432-}:$(uname -a)" in
+  *AMD64:CYGWIN* | *AMD64:MINGW*) distributionPlatform=windows-amd64 ;;
+  :Darwin*x86_64) distributionPlatform=darwin-amd64 ;;
+  :Darwin*arm64) distributionPlatform=darwin-aarch64 ;;
+  :Linux*x86_64*) distributionPlatform=linux-amd64 ;;
+  *)
+    echo "Cannot detect native platform for mvnd on $(uname)-$(uname -m), use pure java version" >&2
+    distributionPlatform=linux-amd64
+    ;;
+  esac
+  distributionUrl="${distributionUrl%-bin.*}-$distributionPlatform.zip"
+  ;;
+maven-mvnd-*) MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/ ;;
+*) MVN_CMD="mvn${scriptName#mvnw}" _MVNW_REPO_PATTERN=/org/apache/maven/ ;;
+esac
+
+# apply MVNW_REPOURL and calculate MAVEN_HOME
+# maven home pattern: ~/.m2/wrapper/dists/{apache-maven-<version>,maven-mvnd-<version>-<platform>}/<hash>
+[ -z "${MVNW_REPOURL-}" ] || distributionUrl="$MVNW_REPOURL$_MVNW_REPO_PATTERN${distributionUrl#*"$_MVNW_REPO_PATTERN"}"
+distributionUrlName="${distributionUrl##*/}"
+distributionUrlNameMain="${distributionUrlName%.*}"
+distributionUrlNameMain="${distributionUrlNameMain%-bin}"
+MAVEN_USER_HOME="${MAVEN_USER_HOME:-${HOME}/.m2}"
+MAVEN_HOME="${MAVEN_USER_HOME}/wrapper/dists/${distributionUrlNameMain-}/$(hash_string "$distributionUrl")"
+
+exec_maven() {
+  unset MVNW_VERBOSE MVNW_USERNAME MVNW_PASSWORD MVNW_REPOURL || :
+  exec "$MAVEN_HOME/bin/$MVN_CMD" "$@" || die "cannot exec $MAVEN_HOME/bin/$MVN_CMD"
+}
+
+if [ -d "$MAVEN_HOME" ]; then
+  verbose "found existing MAVEN_HOME at $MAVEN_HOME"
+  exec_maven "$@"
+fi
+
+case "${distributionUrl-}" in
+*?-bin.zip | *?maven-mvnd-?*-?*.zip) ;;
+*) die "distributionUrl is not valid, must match *-bin.zip or maven-mvnd-*.zip, but found '${distributionUrl-}'" ;;
+esac
+
+# prepare tmp dir
+if TMP_DOWNLOAD_DIR="$(mktemp -d)" && [ -d "$TMP_DOWNLOAD_DIR" ]; then
+  clean() { rm -rf -- "$TMP_DOWNLOAD_DIR"; }
+  trap clean HUP INT TERM EXIT
+else
+  die "cannot create temp dir"
+fi
+
+mkdir -p -- "${MAVEN_HOME%/*}"
+
+# Download and Install Apache Maven
+verbose "Couldn't find MAVEN_HOME, downloading and installing it ..."
+verbose "Downloading from: $distributionUrl"
+verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName"
+
+# select .zip or .tar.gz
+if ! command -v unzip >/dev/null; then
+  distributionUrl="${distributionUrl%.zip}.tar.gz"
+  distributionUrlName="${distributionUrl##*/}"
+fi
+
+# verbose opt
+__MVNW_QUIET_WGET=--quiet __MVNW_QUIET_CURL=--silent __MVNW_QUIET_UNZIP=-q __MVNW_QUIET_TAR=''
+[ "${MVNW_VERBOSE-}" != true ] || __MVNW_QUIET_WGET='' __MVNW_QUIET_CURL='' __MVNW_QUIET_UNZIP='' __MVNW_QUIET_TAR=v
+
+# normalize http auth
+case "${MVNW_PASSWORD:+has-password}" in
+'') MVNW_USERNAME='' MVNW_PASSWORD='' ;;
+has-password) [ -n "${MVNW_USERNAME-}" ] || MVNW_USERNAME='' MVNW_PASSWORD='' ;;
+esac
+
+if [ -z "${MVNW_USERNAME-}" ] && command -v wget >/dev/null; then
+  verbose "Found wget ... using wget"
+  wget ${__MVNW_QUIET_WGET:+"$__MVNW_QUIET_WGET"} "$distributionUrl" -O "$TMP_DOWNLOAD_DIR/$distributionUrlName" || die "wget: Failed to fetch $distributionUrl"
+elif [ -z "${MVNW_USERNAME-}" ] && command -v curl >/dev/null; then
+  verbose "Found curl ... using curl"
+  curl ${__MVNW_QUIET_CURL:+"$__MVNW_QUIET_CURL"} -f -L -o "$TMP_DOWNLOAD_DIR/$distributionUrlName" "$distributionUrl" || die "curl: Failed to fetch $distributionUrl"
+elif set_java_home; then
+  verbose "Falling back to use Java to download"
+  javaSource="$TMP_DOWNLOAD_DIR/Downloader.java"
+  targetZip="$TMP_DOWNLOAD_DIR/$distributionUrlName"
+  cat >"$javaSource" <<-END
+	public class Downloader extends java.net.Authenticator
+	{
+	  protected java.net.PasswordAuthentication getPasswordAuthentication()
+	  {
+	    return new java.net.PasswordAuthentication( System.getenv( "MVNW_USERNAME" ), System.getenv( "MVNW_PASSWORD" ).toCharArray() );
+	  }
+	  public static void main( String[] args ) throws Exception
+	  {
+	    setDefault( new Downloader() );
+	    java.nio.file.Files.copy( java.net.URI.create( args[0] ).toURL().openStream(), java.nio.file.Paths.get( args[1] ).toAbsolutePath().normalize() );
+	  }
+	}
+	END
+  # For Cygwin/MinGW, switch paths to Windows format before running javac and java
+  verbose " - Compiling Downloader.java ..."
+  "$(native_path "$JAVACCMD")" "$(native_path "$javaSource")" || die "Failed to compile Downloader.java"
+  verbose " - Running Downloader.java ..."
+  "$(native_path "$JAVACMD")" -cp "$(native_path "$TMP_DOWNLOAD_DIR")" Downloader "$distributionUrl" "$(native_path "$targetZip")"
+fi
+
+# If specified, validate the SHA-256 sum of the Maven distribution zip file
+if [ -n "${distributionSha256Sum-}" ]; then
+  distributionSha256Result=false
+  if [ "$MVN_CMD" = mvnd.sh ]; then
+    echo "Checksum validation is not supported for maven-mvnd." >&2
+    echo "Please disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2
+    exit 1
+  elif command -v sha256sum >/dev/null; then
+    if echo "$distributionSha256Sum  $TMP_DOWNLOAD_DIR/$distributionUrlName" | sha256sum -c - >/dev/null 2>&1; then
+      distributionSha256Result=true
+    fi
+  elif command -v shasum >/dev/null; then
+    if echo "$distributionSha256Sum  $TMP_DOWNLOAD_DIR/$distributionUrlName" | shasum -a 256 -c >/dev/null 2>&1; then
+      distributionSha256Result=true
+    fi
+  else
+    echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available." >&2
+    echo "Please install either command, or disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2
+    exit 1
+  fi
+  if [ $distributionSha256Result = false ]; then
+    echo "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised." >&2
+    echo "If you updated your Maven version, you need to update the specified distributionSha256Sum property." >&2
+    exit 1
+  fi
+fi
+
+# unzip and move
+if command -v unzip >/dev/null; then
+  unzip ${__MVNW_QUIET_UNZIP:+"$__MVNW_QUIET_UNZIP"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -d "$TMP_DOWNLOAD_DIR" || die "failed to unzip"
+else
+  tar xzf${__MVNW_QUIET_TAR:+"$__MVNW_QUIET_TAR"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -C "$TMP_DOWNLOAD_DIR" || die "failed to untar"
+fi
+
+# Find the actual extracted directory name (handles snapshots where filename != directory name)
+actualDistributionDir=""
+
+# First try the expected directory name (for regular distributions)
+if [ -d "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain" ]; then
+  if [ -f "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain/bin/$MVN_CMD" ]; then
+    actualDistributionDir="$distributionUrlNameMain"
+  fi
+fi
+
+# If not found, search for any directory with the Maven executable (for snapshots)
+if [ -z "$actualDistributionDir" ]; then
+  # enable globbing to iterate over items
+  set +f
+  for dir in "$TMP_DOWNLOAD_DIR"/*; do
+    if [ -d "$dir" ]; then
+      if [ -f "$dir/bin/$MVN_CMD" ]; then
+        actualDistributionDir="$(basename "$dir")"
+        break
+      fi
+    fi
+  done
+  set -f
+fi
+
+if [ -z "$actualDistributionDir" ]; then
+  verbose "Contents of $TMP_DOWNLOAD_DIR:"
+  verbose "$(ls -la "$TMP_DOWNLOAD_DIR")"
+  die "Could not find Maven distribution directory in extracted archive"
+fi
+
+verbose "Found extracted Maven distribution directory: $actualDistributionDir"
+printf %s\\n "$distributionUrl" >"$TMP_DOWNLOAD_DIR/$actualDistributionDir/mvnw.url"
+mv -- "$TMP_DOWNLOAD_DIR/$actualDistributionDir" "$MAVEN_HOME" || [ -d "$MAVEN_HOME" ] || die "fail to move MAVEN_HOME"
+
+clean || :
+exec_maven "$@"
@@ -0,0 +1,189 @@
+<# : batch portion
+@REM ----------------------------------------------------------------------------
+@REM Licensed to the Apache Software Foundation (ASF) under one
+@REM or more contributor license agreements.  See the NOTICE file
+@REM distributed with this work for additional information
+@REM regarding copyright ownership.  The ASF licenses this file
+@REM to you under the Apache License, Version 2.0 (the
+@REM "License"); you may not use this file except in compliance
+@REM with the License.  You may obtain a copy of the License at
+@REM
+@REM    http://www.apache.org/licenses/LICENSE-2.0
+@REM
+@REM Unless required by applicable law or agreed to in writing,
+@REM software distributed under the License is distributed on an
+@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+@REM KIND, either express or implied.  See the License for the
+@REM specific language governing permissions and limitations
+@REM under the License.
+@REM ----------------------------------------------------------------------------
+
+@REM ----------------------------------------------------------------------------
+@REM Apache Maven Wrapper startup batch script, version 3.3.4
+@REM
+@REM Optional ENV vars
+@REM   MVNW_REPOURL - repo url base for downloading maven distribution
+@REM   MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven
+@REM   MVNW_VERBOSE - true: enable verbose log; others: silence the output
+@REM ----------------------------------------------------------------------------
+
+@IF "%__MVNW_ARG0_NAME__%"=="" (SET __MVNW_ARG0_NAME__=%~nx0)
+@SET __MVNW_CMD__=
+@SET __MVNW_ERROR__=
+@SET __MVNW_PSMODULEP_SAVE=%PSModulePath%
+@SET PSModulePath=
+@FOR /F "usebackq tokens=1* delims==" %%A IN (`powershell -noprofile "& {$scriptDir='%~dp0'; $script='%__MVNW_ARG0_NAME__%'; icm -ScriptBlock ([Scriptblock]::Create((Get-Content -Raw '%~f0'))) -NoNewScope}"`) DO @(
+  IF "%%A"=="MVN_CMD" (set __MVNW_CMD__=%%B) ELSE IF "%%B"=="" (echo %%A) ELSE (echo %%A=%%B)
+)
+@SET PSModulePath=%__MVNW_PSMODULEP_SAVE%
+@SET __MVNW_PSMODULEP_SAVE=
+@SET __MVNW_ARG0_NAME__=
+@SET MVNW_USERNAME=
+@SET MVNW_PASSWORD=
+@IF NOT "%__MVNW_CMD__%"=="" ("%__MVNW_CMD__%" %*)
+@echo Cannot start maven from wrapper >&2 && exit /b 1
+@GOTO :EOF
+: end batch / begin powershell #>
+
+$ErrorActionPreference = "Stop"
+if ($env:MVNW_VERBOSE -eq "true") {
+  $VerbosePreference = "Continue"
+}
+
+# calculate distributionUrl, requires .mvn/wrapper/maven-wrapper.properties
+$distributionUrl = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionUrl
+if (!$distributionUrl) {
+  Write-Error "cannot read distributionUrl property in $scriptDir/.mvn/wrapper/maven-wrapper.properties"
+}
+
+switch -wildcard -casesensitive ( $($distributionUrl -replace '^.*/','') ) {
+  "maven-mvnd-*" {
+    $USE_MVND = $true
+    $distributionUrl = $distributionUrl -replace '-bin\.[^.]*$',"-windows-amd64.zip"
+    $MVN_CMD = "mvnd.cmd"
+    break
+  }
+  default {
+    $USE_MVND = $false
+    $MVN_CMD = $script -replace '^mvnw','mvn'
+    break
+  }
+}
+
+# apply MVNW_REPOURL and calculate MAVEN_HOME
+# maven home pattern: ~/.m2/wrapper/dists/{apache-maven-<version>,maven-mvnd-<version>-<platform>}/<hash>
+if ($env:MVNW_REPOURL) {
+  $MVNW_REPO_PATTERN = if ($USE_MVND -eq $False) { "/org/apache/maven/" } else { "/maven/mvnd/" }
+  $distributionUrl = "$env:MVNW_REPOURL$MVNW_REPO_PATTERN$($distributionUrl -replace "^.*$MVNW_REPO_PATTERN",'')"
+}
+$distributionUrlName = $distributionUrl -replace '^.*/',''
+$distributionUrlNameMain = $distributionUrlName -replace '\.[^.]*$','' -replace '-bin$',''
+
+$MAVEN_M2_PATH = "$HOME/.m2"
+if ($env:MAVEN_USER_HOME) {
+  $MAVEN_M2_PATH = "$env:MAVEN_USER_HOME"
+}
+
+if (-not (Test-Path -Path $MAVEN_M2_PATH)) {
+    New-Item -Path $MAVEN_M2_PATH -ItemType Directory | Out-Null
+}
+
+$MAVEN_WRAPPER_DISTS = $null
+if ((Get-Item $MAVEN_M2_PATH).Target[0] -eq $null) {
+  $MAVEN_WRAPPER_DISTS = "$MAVEN_M2_PATH/wrapper/dists"
+} else {
+  $MAVEN_WRAPPER_DISTS = (Get-Item $MAVEN_M2_PATH).Target[0] + "/wrapper/dists"
+}
+
+$MAVEN_HOME_PARENT = "$MAVEN_WRAPPER_DISTS/$distributionUrlNameMain"
+$MAVEN_HOME_NAME = ([System.Security.Cryptography.SHA256]::Create().ComputeHash([byte[]][char[]]$distributionUrl) | ForEach-Object {$_.ToString("x2")}) -join ''
+$MAVEN_HOME = "$MAVEN_HOME_PARENT/$MAVEN_HOME_NAME"
+
+if (Test-Path -Path "$MAVEN_HOME" -PathType Container) {
+  Write-Verbose "found existing MAVEN_HOME at $MAVEN_HOME"
+  Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD"
+  exit $?
+}
+
+if (! $distributionUrlNameMain -or ($distributionUrlName -eq $distributionUrlNameMain)) {
+  Write-Error "distributionUrl is not valid, must end with *-bin.zip, but found $distributionUrl"
+}
+
+# prepare tmp dir
+$TMP_DOWNLOAD_DIR_HOLDER = New-TemporaryFile
+$TMP_DOWNLOAD_DIR = New-Item -Itemtype Directory -Path "$TMP_DOWNLOAD_DIR_HOLDER.dir"
+$TMP_DOWNLOAD_DIR_HOLDER.Delete() | Out-Null
+trap {
+  if ($TMP_DOWNLOAD_DIR.Exists) {
+    try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null }
+    catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" }
+  }
+}
+
+New-Item -Itemtype Directory -Path "$MAVEN_HOME_PARENT" -Force | Out-Null
+
+# Download and Install Apache Maven
+Write-Verbose "Couldn't find MAVEN_HOME, downloading and installing it ..."
+Write-Verbose "Downloading from: $distributionUrl"
+Write-Verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName"
+
+$webclient = New-Object System.Net.WebClient
+if ($env:MVNW_USERNAME -and $env:MVNW_PASSWORD) {
+  $webclient.Credentials = New-Object System.Net.NetworkCredential($env:MVNW_USERNAME, $env:MVNW_PASSWORD)
+}
+[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
+$webclient.DownloadFile($distributionUrl, "$TMP_DOWNLOAD_DIR/$distributionUrlName") | Out-Null
+
+# If specified, validate the SHA-256 sum of the Maven distribution zip file
+$distributionSha256Sum = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionSha256Sum
+if ($distributionSha256Sum) {
+  if ($USE_MVND) {
+    Write-Error "Checksum validation is not supported for maven-mvnd. `nPlease disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties."
+  }
+  Import-Module $PSHOME\Modules\Microsoft.PowerShell.Utility -Function Get-FileHash
+  if ((Get-FileHash "$TMP_DOWNLOAD_DIR/$distributionUrlName" -Algorithm SHA256).Hash.ToLower() -ne $distributionSha256Sum) {
+    Write-Error "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised. If you updated your Maven version, you need to update the specified distributionSha256Sum property."
+  }
+}
+
+# unzip and move
+Expand-Archive "$TMP_DOWNLOAD_DIR/$distributionUrlName" -DestinationPath "$TMP_DOWNLOAD_DIR" | Out-Null
+
+# Find the actual extracted directory name (handles snapshots where filename != directory name)
+$actualDistributionDir = ""
+
+# First try the expected directory name (for regular distributions)
+$expectedPath = Join-Path "$TMP_DOWNLOAD_DIR" "$distributionUrlNameMain"
+$expectedMvnPath = Join-Path "$expectedPath" "bin/$MVN_CMD"
+if ((Test-Path -Path $expectedPath -PathType Container) -and (Test-Path -Path $expectedMvnPath -PathType Leaf)) {
+  $actualDistributionDir = $distributionUrlNameMain
+}
+
+# If not found, search for any directory with the Maven executable (for snapshots)
+if (!$actualDistributionDir) {
+  Get-ChildItem -Path "$TMP_DOWNLOAD_DIR" -Directory | ForEach-Object {
+    $testPath = Join-Path $_.FullName "bin/$MVN_CMD"
+    if (Test-Path -Path $testPath -PathType Leaf) {
+      $actualDistributionDir = $_.Name
+    }
+  }
+}
+
+if (!$actualDistributionDir) {
+  Write-Error "Could not find Maven distribution directory in extracted archive"
+}
+
+Write-Verbose "Found extracted Maven distribution directory: $actualDistributionDir"
+Rename-Item -Path "$TMP_DOWNLOAD_DIR/$actualDistributionDir" -NewName $MAVEN_HOME_NAME | Out-Null
+try {
+  Move-Item -Path "$TMP_DOWNLOAD_DIR/$MAVEN_HOME_NAME" -Destination $MAVEN_HOME_PARENT | Out-Null
+} catch {
+  if (! (Test-Path -Path "$MAVEN_HOME" -PathType Container)) {
+    Write-Error "fail to move MAVEN_HOME"
+  }
+} finally {
+  try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null }
+  catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" }
+}
+
+Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD"
@@ -1,36 +1,101 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<project xmlns="http://maven.apache.org/POM/4.0.0"
-         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-         xsi:schemaLocation="http://maven.apache.org/POM/4.0.0
-         http://maven.apache.org/xsd/maven-4.0.0.xsd">
-   <modelVersion>4.0.0</modelVersion>
+<!--
+  ~ QQQ - Low-code Application Framework for Engineers.
+  ~ Copyright (C) 2021-2026.  Kingsrook, LLC
+  ~ 651 N Broad St Ste 205 # 6917 | Middletown DE 19709 | United States
+  ~ contact@kingsrook.com
+  ~ https://github.com/Kingsrook/
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~     https://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->

-   <groupId>com.kingsrook.qbits</groupId>
-   <artifactId>qbit-example-extension</artifactId>
-   <version>0.1.0-SNAPSHOT</version>
-   <packaging>jar</packaging>
-
-   <name>QBit Example Extension</name>
-   <description>Example Extension QBit - rename this for your QBit</description>
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">

   <properties>
+      <revision>0.1.0-SNAPSHOT</revision>
      <maven.compiler.source>21</maven.compiler.source>
      <maven.compiler.target>21</maven.compiler.target>
-      <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
-      <qqq.version>4.0.0</qqq.version>
+      <jacoco.version>0.8.15</jacoco.version>
+      <h2.version>2.2.224</h2.version>
   </properties>

+   <parent>
+      <groupId>com.kingsrook</groupId>
+      <artifactId>qbit-build-parent</artifactId>
+      <version>2.0.0</version>
+   </parent>
+
+   <groupId>com.kingsrook.qbits</groupId>
+   <artifactId>qbit-email</artifactId>
+   <version>${revision}</version>
+   <packaging>jar</packaging>
+
+   <name>QBit Email</name>
+   <description>QBit for email across a QQQ system: an outbox with retries, SMTP, SES, Postmark, SendGrid, Mailgun and Gmail providers, Markdown and MJML templates with branding, delivery tracking, suppression and one-click unsubscribe</description>
+   <url>https://github.com/QRun-IO/qbit-email</url>
+
+   <modelVersion>4.0.0</modelVersion>
+
+   <licenses>
+      <license>
+         <name>Apache License, Version 2.0</name>
+         <url>https://www.apache.org/licenses/LICENSE-2.0</url>
+         <distribution>repo</distribution>
+      </license>
+   </licenses>
+
+   <developers>
+      <developer>
+         <id>kingsrook</id>
+         <name>Kingsrook Team</name>
+         <email>contact@kingsrook.com</email>
+         <organization>Kingsrook, LLC</organization>
+         <organizationUrl>https://kingsrook.com</organizationUrl>
+      </developer>
+   </developers>
+
+   <scm>
+      <connection>scm:git:git://github.com/QRun-IO/qbit-email.git</connection>
+      <developerConnection>scm:git:ssh://github.com:QRun-IO/qbit-email.git</developerConnection>
+      <url>https://github.com/QRun-IO/qbit-email</url>
+      <tag>HEAD</tag>
+   </scm>
+
   <dependencies>
      <dependency>
         <groupId>com.kingsrook.qqq</groupId>
         <artifactId>qqq-backend-core</artifactId>
-         <version>${qqq.version}</version>
      </dependency>

+      <dependency>
+         <groupId>com.kingsrook.qqq</groupId>
+         <artifactId>qqq-backend-module-rdbms</artifactId>
+         <scope>test</scope>
+      </dependency>
+      <dependency>
+         <groupId>com.kingsrook.qqq</groupId>
+         <artifactId>qqq-middleware-javalin</artifactId>
+         <scope>test</scope>
+      </dependency>
+      <dependency>
+         <groupId>com.h2database</groupId>
+         <artifactId>h2</artifactId>
+         <version>${h2.version}</version>
+         <scope>test</scope>
+      </dependency>
      <dependency>
         <groupId>org.junit.jupiter</groupId>
         <artifactId>junit-jupiter</artifactId>
-         <version>5.10.0</version>
         <scope>test</scope>
      </dependency>
      <dependency>
@@ -45,14 +110,104 @@
      <plugins>
         <plugin>
            <groupId>org.apache.maven.plugins</groupId>
-            <artifactId>maven-compiler-plugin</artifactId>
-            <version>3.11.0</version>
+            <artifactId>maven-checkstyle-plugin</artifactId>
+            <version>3.3.1</version>
+            <dependencies>
+               <dependency>
+                  <groupId>com.puppycrawl.tools</groupId>
+                  <artifactId>checkstyle</artifactId>
+                  <version>10.12.6</version>
+               </dependency>
+            </dependencies>
+            <configuration>
+               <configLocation>checkstyle/config.xml</configLocation>
+               <headerLocation>checkstyle/license.txt</headerLocation>
+               <encoding>UTF-8</encoding>
+               <consoleOutput>true</consoleOutput>
+               <failsOnError>false</failsOnError>
+               <failOnViolation>true</failOnViolation>
+               <violationSeverity>warning</violationSeverity>
+               <includeTestSourceDirectory>false</includeTestSourceDirectory>
+            </configuration>
+            <executions>
+               <execution>
+                  <id>validate</id>
+                  <phase>validate</phase>
+                  <goals>
+                     <goal>check</goal>
+                  </goals>
+               </execution>
+            </executions>
         </plugin>
         <plugin>
-            <groupId>org.apache.maven.plugins</groupId>
-            <artifactId>maven-surefire-plugin</artifactId>
-            <version>3.1.2</version>
+            <groupId>org.jacoco</groupId>
+            <artifactId>jacoco-maven-plugin</artifactId>
+            <version>${jacoco.version}</version>
+            <executions>
+               <execution>
+                  <id>prepare-agent</id>
+                  <goals>
+                     <goal>prepare-agent</goal>
+                  </goals>
+               </execution>
+               <execution>
+                  <id>report</id>
+                  <phase>verify</phase>
+                  <goals>
+                     <goal>report</goal>
+                  </goals>
+               </execution>
+               <execution>
+                  <id>check</id>
+                  <goals>
+                     <goal>check</goal>
+                  </goals>
+                  <configuration>
+                     <rules>
+                        <rule>
+                           <element>BUNDLE</element>
+                           <limits>
+                              <limit>
+                                 <counter>INSTRUCTION</counter>
+                                 <value>COVEREDRATIO</value>
+                                 <minimum>0.70</minimum>
+                              </limit>
+                              <limit>
+                                 <counter>CLASS</counter>
+                                 <value>COVEREDRATIO</value>
+                                 <minimum>0.90</minimum>
+                              </limit>
+                           </limits>
+                        </rule>
+                     </rules>
+                  </configuration>
+               </execution>
+            </executions>
         </plugin>
      </plugins>
   </build>
-</project>
+
+   <profiles>
+      <!-- QQQ 4.1 APIs until qbit-build-parent imports the 4.1 BOM (as in qbit-quick-search and qbit-cdn, ADR-0007). -->
+      <profile>
+         <id>qqq-snapshot</id>
+         <activation>
+            <activeByDefault>true</activeByDefault>
+         </activation>
+         <properties>
+            <qqq.snapshot.version>4.1.0-RC.4</qqq.snapshot.version>
+         </properties>
+         <dependencyManagement>
+            <dependencies>
+               <dependency>
+                  <groupId>com.kingsrook.qqq</groupId>
+                  <artifactId>qqq-bom-pom</artifactId>
+                  <version>${qqq.snapshot.version}</version>
+                  <type>pom</type>
+                  <scope>import</scope>
+               </dependency>
+            </dependencies>
+         </dependencyManagement>
+      </profile>
+   </profiles>
+</project>
@@ -0,0 +1,75 @@
+/*
+ * QQQ - Low-code Application Framework for Engineers.
+ * Copyright (C) 2021-2025.  Kingsrook, LLC
+ * 651 N Broad St Ste 205 # 6917 | Middletown DE 19709 | United States
+ * contact@kingsrook.com
+ * https://github.com/Kingsrook/
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package com.kingsrook.qbits.email;
+
+
+import java.util.List;
+import com.kingsrook.qqq.backend.core.model.metadata.QInstance;
+import com.kingsrook.qqq.backend.core.model.metadata.qbits.QBitConfig;
+import com.kingsrook.qqq.backend.core.utils.StringUtils;
+
+
+/*******************************************************************************
+ ** Configuration for the email qbit. See docs/DESIGN.md.
+ *******************************************************************************/
+public class EmailQBitConfig implements QBitConfig
+{
+   private String backendName;
+
+
+
+   /*******************************************************************************
+    ** Validate the configuration against the instance.
+    *******************************************************************************/
+   @Override
+   public void validate(QInstance qInstance, List<String> errors)
+   {
+      if(!StringUtils.hasContent(backendName))
+      {
+         errors.add("EmailQBitConfig: backendName is required");
+      }
+      else if(qInstance.getBackend(backendName) == null)
+      {
+         errors.add("EmailQBitConfig: backend not found: " + backendName);
+      }
+   }
+
+
+
+   /*******************************************************************************
+    ** Getter for backendName
+    *******************************************************************************/
+   public String getBackendName()
+   {
+      return (backendName);
+   }
+
+
+
+   /*******************************************************************************
+    ** Fluent setter for backendName
+    *******************************************************************************/
+   public EmailQBitConfig withBackendName(String backendName)
+   {
+      this.backendName = backendName;
+      return (this);
+   }
+}
@@ -0,0 +1,130 @@
+/*
+ * QQQ - Low-code Application Framework for Engineers.
+ * Copyright (C) 2021-2025.  Kingsrook, LLC
+ * 651 N Broad St Ste 205 # 6917 | Middletown DE 19709 | United States
+ * contact@kingsrook.com
+ * https://github.com/Kingsrook/
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package com.kingsrook.qbits.email;
+
+
+import java.util.ArrayList;
+import java.util.List;
+import com.kingsrook.qqq.backend.core.exceptions.QException;
+import com.kingsrook.qqq.backend.core.model.metadata.MetaDataProducerMultiOutput;
+import com.kingsrook.qqq.backend.core.model.metadata.QInstance;
+import com.kingsrook.qqq.backend.core.model.metadata.qbits.QBitMetaData;
+import com.kingsrook.qqq.backend.core.model.metadata.qbits.QBitMetaDataProducer;
+
+
+/*******************************************************************************
+ ** Entry point of the email qbit (scaffold: the tables, providers and app
+ ** arrive in phase (a), see docs/DESIGN.md).
+ *******************************************************************************/
+public class EmailQBitProducer implements QBitMetaDataProducer<EmailQBitConfig>
+{
+   public static final String GROUP_ID    = "com.kingsrook.qbits";
+   public static final String ARTIFACT_ID = "qbit-email";
+   public static final String VERSION     = "0.1.0";
+
+   private EmailQBitConfig qBitConfig;
+   private String          namespace;
+
+
+
+   /*******************************************************************************
+    ** Fluent setter for the config.
+    *******************************************************************************/
+   public EmailQBitProducer withQBitConfig(EmailQBitConfig config)
+   {
+      this.qBitConfig = config;
+      return (this);
+   }
+
+
+
+   /*******************************************************************************
+    ** Getter for the config.
+    *******************************************************************************/
+   @Override
+   public EmailQBitConfig getQBitConfig()
+   {
+      return (qBitConfig);
+   }
+
+
+
+   /*******************************************************************************
+    ** Fluent setter for the namespace.
+    *******************************************************************************/
+   public EmailQBitProducer withNamespace(String namespace)
+   {
+      this.namespace = namespace;
+      return (this);
+   }
+
+
+
+   /*******************************************************************************
+    ** Getter for the namespace.
+    *******************************************************************************/
+   @Override
+   public String getNamespace()
+   {
+      return (namespace);
+   }
+
+
+
+   /*******************************************************************************
+    ** Identity.
+    *******************************************************************************/
+   @Override
+   public QBitMetaData getQBitMetaData()
+   {
+      return (new QBitMetaData().withGroupId(GROUP_ID).withArtifactId(ARTIFACT_ID).withVersion(VERSION).withNamespace(namespace).withConfig(qBitConfig));
+   }
+
+
+
+   /*******************************************************************************
+    ** Package-scanned producers have no config: skip them.
+    *******************************************************************************/
+   @Override
+   public boolean isEnabled()
+   {
+      return (qBitConfig != null);
+   }
+
+
+
+   /*******************************************************************************
+    ** Validate the config and register the qbit (scaffold: the email_ tables,
+    ** providers, processes and app arrive in phase (a), docs/DESIGN.md).
+    *******************************************************************************/
+   @Override
+   public MetaDataProducerMultiOutput produce(QInstance qInstance) throws QException
+   {
+      List<String> errors = new ArrayList<>();
+      qBitConfig.validate(qInstance, errors);
+      if(!errors.isEmpty())
+      {
+         throw (new QException("Email qbit configuration is invalid: " + String.join("; ", errors)));
+      }
+      qInstance.addQBit(getQBitMetaData());
+      return (new MetaDataProducerMultiOutput());
+   }
+}
@@ -1,75 +0,0 @@
-/*******************************************************************************
- ** Configuration for the Example Extension QBit.
- *******************************************************************************/
-package com.kingsrook.qbits.example;
-
-import java.util.List;
-
-import com.kingsrook.qqq.backend.core.model.metadata.QInstance;
-import com.kingsrook.qqq.backend.core.model.metadata.qbits.QBitConfig;
-
-
-/*******************************************************************************
- ** Configuration class for the Example Extension QBit.
- *******************************************************************************/
-public class ExampleExtensionQBitConfig implements QBitConfig
-{
-   private String  targetTableName;
-   private Boolean enableFeatureX = true;
-
-
-
-   /*******************************************************************************
-    ** Validate configuration before QBit is produced.
-    *******************************************************************************/
-   @Override
-   public void validate(QInstance qInstance, List<String> errors)
-   {
-      if(targetTableName != null && qInstance.getTable(targetTableName) == null)
-      {
-         errors.add("Target table not found: " + targetTableName);
-      }
-   }
-
-
-
-   /*******************************************************************************
-    ** Getter for targetTableName
-    *******************************************************************************/
-   public String getTargetTableName()
-   {
-      return targetTableName;
-   }
-
-
-
-   /*******************************************************************************
-    ** Fluent setter for targetTableName
-    *******************************************************************************/
-   public ExampleExtensionQBitConfig withTargetTableName(String targetTableName)
-   {
-      this.targetTableName = targetTableName;
-      return this;
-   }
-
-
-
-   /*******************************************************************************
-    ** Getter for enableFeatureX
-    *******************************************************************************/
-   public Boolean getEnableFeatureX()
-   {
-      return enableFeatureX;
-   }
-
-
-
-   /*******************************************************************************
-    ** Fluent setter for enableFeatureX
-    *******************************************************************************/
-   public ExampleExtensionQBitConfig withEnableFeatureX(Boolean enableFeatureX)
-   {
-      this.enableFeatureX = enableFeatureX;
-      return this;
-   }
-}
@@ -1,66 +0,0 @@
-/*******************************************************************************
- ** Producer for the Example Extension QBit.
- *******************************************************************************/
-package com.kingsrook.qbits.example;
-
-import com.kingsrook.qqq.backend.core.exceptions.QException;
-import com.kingsrook.qqq.backend.core.model.metadata.QInstance;
-import com.kingsrook.qqq.backend.core.model.metadata.qbits.QBitMetaData;
-import com.kingsrook.qqq.backend.core.model.metadata.qbits.QBitProducer;
-
-
-/*******************************************************************************
- ** Producer class for the Example Extension QBit.
- *******************************************************************************/
-public class ExampleExtensionQBitProducer implements QBitProducer
-{
-   public static final String GROUP_ID    = "com.kingsrook.qbits";
-   public static final String ARTIFACT_ID = "qbit-example-extension";
-   public static final String VERSION     = "0.1.0";
-
-   private ExampleExtensionQBitConfig config;
-
-
-
-   /*******************************************************************************
-    ** Produce this QBit into the given QInstance.
-    *******************************************************************************/
-   @Override
-   public void produce(QInstance qInstance, String namespace) throws QException
-   {
-      QBitMetaData qBitMetaData = new QBitMetaData()
-         .withGroupId(GROUP_ID)
-         .withArtifactId(ARTIFACT_ID)
-         .withVersion(VERSION)
-         .withNamespace(namespace)
-         .withConfig(config);
-
-      qInstance.addQBit(qBitMetaData);
-
-      if(config != null && config.getTargetTableName() != null)
-      {
-         applyTableCustomizations(qInstance, config.getTargetTableName());
-      }
-   }
-
-
-
-   /*******************************************************************************
-    ** Apply customizations to the target table.
-    *******************************************************************************/
-   private void applyTableCustomizations(QInstance qInstance, String tableName)
-   {
-      // Implement your extension logic here
-   }
-
-
-
-   /*******************************************************************************
-    ** Fluent setter for config
-    *******************************************************************************/
-   public ExampleExtensionQBitProducer withConfig(ExampleExtensionQBitConfig config)
-   {
-      this.config = config;
-      return this;
-   }
-}
@@ -1,23 +0,0 @@
-/*******************************************************************************
- ** Example table customizer.
- *******************************************************************************/
-package com.kingsrook.qbits.example.customizers;
-
-import com.kingsrook.qqq.backend.core.model.metadata.tables.QTableMetaData;
-
-
-/*******************************************************************************
- ** Example table customizer that adds behavior to existing tables.
- *******************************************************************************/
-public class ExampleTableCustomizer
-{
-
-   /*******************************************************************************
-    ** Apply customizations to the given table.
-    *******************************************************************************/
-   public void customize(QTableMetaData table)
-   {
-      // Example: Add audit tracking fields
-      // table.withField(new QFieldMetaData("createdAt", QFieldType.DATE_TIME));
-   }
-}
@@ -0,0 +1,69 @@
+/*
+ * QQQ - Low-code Application Framework for Engineers.
+ * Copyright (C) 2021-2025.  Kingsrook, LLC
+ * 651 N Broad St Ste 205 # 6917 | Middletown DE 19709 | United States
+ * contact@kingsrook.com
+ * https://github.com/Kingsrook/
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package com.kingsrook.qbits.email;
+
+
+import com.kingsrook.qqq.backend.core.exceptions.QException;
+import com.kingsrook.qqq.backend.core.model.metadata.QInstance;
+import com.kingsrook.qqq.backend.core.model.metadata.QBackendMetaData;
+import org.junit.jupiter.api.Test;
+import static org.assertj.core.api.Assertions.assertThat;
+import static org.assertj.core.api.Assertions.assertThatThrownBy;
+
+
+/*******************************************************************************
+ ** Scaffold checks for the producer and config.
+ *******************************************************************************/
+class EmailQBitProducerTest
+{
+   /*******************************************************************************
+    ** A valid config registers the qbit.
+    *******************************************************************************/
+   @Test
+   void producesWithValidConfig() throws Exception
+   {
+      QInstance instance = new QInstance();
+      instance.addBackend(new QBackendMetaData().withName("memory"));
+      EmailQBitProducer producer = new EmailQBitProducer()
+         .withNamespace(null)
+         .withQBitConfig(new EmailQBitConfig().withBackendName("memory"));
+      assertThat(producer.isEnabled()).isTrue();
+      assertThat(producer.getNamespace()).isNull();
+      assertThat(producer.getQBitConfig().getBackendName()).isEqualTo("memory");
+      assertThat(producer.produce(instance)).isNotNull();
+      assertThat(instance.getQBits()).isNotEmpty();
+   }
+
+
+
+   /*******************************************************************************
+    ** A missing or unknown backend is refused; no config means disabled.
+    *******************************************************************************/
+   @Test
+   void refusesInvalidConfig()
+   {
+      assertThat(new EmailQBitProducer().isEnabled()).isFalse();
+      assertThatThrownBy(() -> new EmailQBitProducer().withQBitConfig(new EmailQBitConfig()).produce(new QInstance()))
+         .isInstanceOf(QException.class).hasMessageContaining("backendName is required");
+      assertThatThrownBy(() -> new EmailQBitProducer().withQBitConfig(new EmailQBitConfig().withBackendName("nope")).produce(new QInstance()))
+         .isInstanceOf(QException.class).hasMessageContaining("backend not found");
+   }
+}